CH7214C

如果您对产品有相关疑问,或者遇到任何,您都可以注册网站帐号,
然后到技术支持论坛去提问寻求帮助。

特征

. Compliant with USB Type-C Cable and Connector Specification Revision 1.2
. Compliant with the latest Power Delivery Specification Revision 2.0, Version 1.1
. Supports VESA DisplayPort Alt. Mode 1.0a
. Bi-directional conversion between the HPD signal and Power Delivery VDM
. Support DisplayPort AUX CH DC voltage level detection
. USB Type-C SBU and DisplayPort AUX CH Switch integrated
. Configurable USB Type-C Ports. Device can be designed with Type-C plug or Type-C receptacle connector. CC logic and Power Delivery protocol support one sink port and one  harging port
. Rp and Rd resistors for DFP/UFP/DRP integrated together with the Ra termination resistor for VCONN Powered Accessory
. Support up to 5V@3A USB Type-C Current and Source Power Rules defined in USB PD Specification Revision 2.0, Version 1.2 in Source role.
. Support Dead Battery
. Support CDP and DCP mode of Battery Charging Specification Revision 1.2
. Support Type-C plug orientation detection
. Integrated USB Billboard Class, Version 1.21 for supporting USB Type-C Alt. Mode
. GPIO/I2C/SPI/UART control interface with external component.
. VCONN power supply supported, with 5V to 3.3V and 3.3V to 1.2V Regulator integrated to save the BOM cost
. Power charging control output support
. Embedded MCU to handle the control logic
. Support device boot up by loading firmware from the embedded EEPROM automatically
. IIC slave interface and USB 2.0 interface are available for firmware update and debug
. Crystal free
. Low power architecture
. RoHS compliant and Halogen free package
 Offered in 40-Pin QFN (5 x 5 mm)

描述

Chrontel’s CH7214C is a low cost USB Type-C logic controller. The device is targeted for system designers implementing USB Type-C devices with DisplayPort capabilities and USB Power Delivery 2.0 support. The CH7214C integrates the USB Type-C plug orientation and attached detection mechanism on the CC (Channel Communication) pins. Its robust Power Delivery 2.0 module using the BMC protocol can enable USB Type-C devices operating in various power management roles including Consumer, Provider and Power Role Swap. CH7214C also supports the battery charging with specification revision 1.2.The DisplayPort Alt. mode is another alternative interface supported in the CH7214C. A built-in Billboard Class can be automatically exposed to the USB 2.0 D+/- bus if a Type-C PD Source (DFP) does not equip USB Type-C Alt. Mode features that support DisplayPort signal transmission. The CH7214C’s bi-directional signal converter for the DisplayPort HPD (hot plug detection) and VDM (Vendor Defined Message) is capable of translating the HPD to the appropriated VDM to Type-C DP device and vice versa. In addition to hardware support of PHY and Link layers, the CH7214C has an internal microprocessor to handle the cable logic communication and can be programmed for customization according to the application of USB Type-C platforms In order to save the BOM cost of the end product such as cable, the CH7214C also integrates all necessary
components and circuits, such as LDO, clock generation,isolation circuit, Ra, Rd and Rp etc.

结构图

数据表

应用说明

暂无信息

技术报告

暂无信息

规格

暂无信息

订单信息

暂无信息

视频

暂无信息
分享与关注:

关于我们

了解更多
昆泰集成电路(上海)有限公司是美国Chrontel,Inc.在上海的全资子公司。Chrontel成立于1986年,是一家从事混合信号集成电路研发与生产的公司,总部位于美国硅谷圣何西,并于世界各地拥有多家子公司和办事机构。我们的产品包括电视解码器,电视编码器,DVI/LVDS/HDMI编码器,数字电视解调器,图像和音频处理,显示...

联系信息


地址:中国上海浦东新区龙东大道3000号1号楼101室

电话:86-21-68791668

传真:86-21-68791558


      总公司网站: www.chrontel.com


      电子邮件:ke.liu@chrontel.com.cn

Copyright © 1998-2017 Chrontel, Inc. All Rights Reserved.     沪公网安备 31011502003526号      沪ICP备15010045号     隐私保护 法律声明